More and more people look forward to getting the Huawei certification by taking an exam. However, the exam is very difficult for a lot of people. Especially if you do not choose the correct study materials and find a suitable way, it will be more difficult for you to pass the HCIP-Datacom-Advanced Routing & Switching Technology V1.0 exam and get the related certification. If you want to get the related certification in an efficient method, please choose the H12-831_V1.0-ENU learning materials from our company. We can guarantee that the study materials from our company will help you pass the exam and get the certification in a relaxed and efficient method. Now please share your valuable time to have a look at the introduction about our HCIP-Datacom-Advanced Routing & Switching Technology V1.0 training files.

High pass rate

It is known to us that our H12-831_V1.0-ENU learning materials have been keeping a high pass rate all the time. There is no doubt that it must be due to the high quality of our study materials. It is a matter of common sense that pass rate is the most important standard to testify the HCIP-Datacom-Advanced Routing & Switching Technology V1.0 training files. The high pass rate of our study materials means that our products are very effective and useful for all people to pass their exam and get the related certification. So if you buy the H12-831_V1.0-ENU study questions from our company, you will get the certification in a shorter time.

Perfect service

In order to make all customers feel comfortable, our company will promise that we will offer the perfect and considerate service for all customers. If you buy the H12-831_V1.0-ENU training files from our company, you will have the right to enjoy the perfect service. We have employed a lot of online workers to help all customers solve their problem. If you have any questions about the HCIP-Datacom-Advanced Routing & Switching Technology V1.0 learning materials, do not hesitate and ask us in your anytime, we are glad to answer your questions and help you use our H12-831_V1.0-ENU study questions well. We believe our perfect service will make you feel comfortable when you are preparing for your exam.

Professional training

All the H12-831_V1.0-ENU training files of our company are designed by the experts and professors in the field. The quality of our study materials is guaranteed. According to the actual situation of all customers, we will make the suitable study plan for all customers. If you buy the HCIP-Datacom-Advanced Routing & Switching Technology V1.0 learning materials from our company, we can promise that you will get the professional training to help you pass your exam easily. By our professional training, you will pass your exam and get the related certification in the shortest time.

Huawei H12-831_V1.0-ENU Exam Syllabus Topics:

Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Sample Questions:

1. Which of the following statements are true about OSPFv3 Link-LSAs and Intra-Area-Prefix-LSAs?

A) Each device generates an Intra-Area-Prefix-LSA for each link.
B) A Link-LSA describes the link-local address and IPv6 prefix address on the link.
C) The prefix information described by the Intra-Area-Prefix-LSA is associated with the Router-LSA or Network-LSA.
D) Each device generates a Link-LSA for each link.

2. On the OSPF network shown in the figure, area 1 is a stub area, area 2 is a totally stub area, and area 3 is an NSSA. By default, which of the following routers does not have default routes in its routing table?

A) R6
B) R5
C) R3
D) R4

3. On the network shown in the figure, PC1 and PC2 are connected to the same switch (SW1) and belong to the same VLAN .

Which of the following are possible causes of a communication failure between PC1 and PC2?
Options:

A) Port isolation is configured on SW1.
B) Incorrect static ARP entries are configured on the hosts.
C) The link of SW1's GE0/0/1 is faulty.
D) SW1's GE0/0/2 is shut down.

4. As shown in the figure, R1 to R4 are four routers in AS123 . They all run OSPF to implement route reachability within the AS .
* Network segments 10.1.1.0/24 and 10.4.4.0/24 are not advertised into OSPF .
* R1 and R4 establish an IBGP peer relationship using Loopback0 and advertise network segments
10.1.1.0/24 and 10.4.4.0/24 into BGP .
Which of the following methods can be used to implement communication between PC1 and PC2 ?

Options:

A) Run BGP on R2 and R3, and establish full-mesh IBGP connections in AS 123.
B) Deploy MPLS and LDP on R1 to R4 and establish LSPs for routes 1.1.1.1/32 and 4.4.4.4/32.
C) Deploy policy-based routing on R1 and specify R2 as the next hop for traffic from PC1 to PC2.
D) On R1 and R4, import routes 10.1.1.0/24 and 10.4.4.0/24 into OSPF.

5. On the network shown in the figure, IS-IS runs on R1, R2, R4, and R5, and the area ID is 49.0001. IS-IS runs on R3 and R6, and the area ID is 49.0002. The import-route isis level-2 into level-1 command is configured on R2 and R5. In AS 65000, R1, R3, R4, and R6 each establish iBGP peer relationships with R2 and R5. R2 and R5 are RR (Route Reflectors), and R1, R4, R3, and R6 are the iBGP peer relationship clients. The iBGP peer relationship ID is 10.0.0.X/32, where X is the number of the iBGP router. R1 and R4 import the external route 192.168.1.0/24 to BGP through the import-route command, and R3 and R6 import the external route
192.168.2.0/24 to BGP through the import-route command. Which of the following statements are true?

A) The routing table of R4 contains two equal-cost default routes.
B) The routing table of R1 contains two equal-cost default routes.
C) The route 192.168.2.0/24 in the routing table of R4 has two different outbound interfaces.
D) The routing table of R1 contains the route 192.168.2.0/24.

Solutions: