Updated Feb-2022 100% Cover Real DES-1241 Exam Questions - 100% Pass Guarantee

Use Real EMC Dumps - 100% Free DES-1241 Exam Dumps

NEW QUESTION 18
What is the maximum number of base enclosures in a cluster when planning a Dell EMC PowerStore T installation?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

 

NEW QUESTION 19
In an unpopulated rack, at what U mark is the base enclosure racked?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

Explanation:
Reference:
+&cd=3&hl=en&ct=clnk&gl=pk&client=ubuntu

 

NEW QUESTION 20
What method is used to power down a Dell EMC PowerStore system in a true emergency situation?

• A. Remove base enclosure power cables
• B. Power Down Cluster in PowerStore GUI
• C. Run svc_node shutdown
• D. Turn off the cabinet switches

Answer: D

 

NEW QUESTION 21
A Storage Administrator needs to address specific fixes within their Dell EMC PowerStore system. Which NDU software upgrade option is used for this situation?

• A. Software releases
• B. Drive firmware
• C. vCenter
• D. Hotfixes

Answer: C

 

NEW QUESTION 22
Which component is only replaceable by qualified personnel?

• A. Memory module
• B. Embedded I/O module
• C. 4-Port mezzanine card
• D. Battery backup unit

Answer: A

 

NEW QUESTION 23
A Storage Administrator needs root access. What command needs to be run?

• A. svc_inject -root
• B. svc_inject generate-key --root
• C. sudo service
• D. su - root

Answer: B

 

NEW QUESTION 24
A Storage Administrator notices two fans in a Dell EMC PowerStore are faulted. What describes the system behavior in this circumstance?

• A. An increased fan speed signal is sent to the surviving fans and the system continues normal operations
• B. Upon the second fan fault, all host I/O is terminated immediately and the PowerStore goes through the halt and vault process and shuts down
• C. A five-minute timer starts upon the second fan fault and the system shuts down automatically after the timer expires
• D. CPU clock speed is reduced by 50% to lower internal temperatures and the system continues normal operations

Answer: C

 

NEW QUESTION 25
What safety equipment is critical to have on hand to avoid equipment failure before replacing any components in a Dell EMC PowerStore array?

• A. Stabilization Kit
• B. Maintenance Kit
• C. ESD Kit
• D. Rail Kit

Answer: C

 

NEW QUESTION 26
During Dell EMC PowerStore startup, both appliance nodes have rebooted in service mode. What must be done first to avoid management software conflicts?

• A. Clear the boot mode
• B. Disable node B boot mode
• C. Reboot node B
• D. Return node A to normal mode

Answer: D

Explanation:
Reference:
https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-1000/pwrstr-isg/power-control- procedure-considerations?guid=guid-4352c94e-0ae7-4a2e-8593-9ae135bb9e34&lang=en-us

 

NEW QUESTION 27
How many fan module failures can a node tolerate?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

Explanation:
Reference:
https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h18149-dell-emc-powerstore-platform-introduction.pdf (14)

 

NEW QUESTION 28
Order the NDU operational steps.

Answer:

Explanation:

 

NEW QUESTION 29
How many fan module failures can a node tolerate?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

 

NEW QUESTION 30
What does the output of the PSTCLI command "nas_server show" display from a Dell EMC PowerStore T?

• A. Memory utilization and thread count for NFS NAS servers
• B. SIDs of SMB NAS servers joined to the AD Domain
• C. If NAS servers are present if they are either NFS or Licensed
• D. If NAS servers are present and if they are either Started or Degraded

Answer: C

 

NEW QUESTION 31
When a Dell EMC PowerStore node powers up in service mode, what are the commands and sequence used from the appliance SSH client to restore the node back to normal?

• A. svc_rescue_state clear
  svc_node reboot
• B. svc_node restart
  svc_rescue_state start
• C. svc_node shutdown
  svc_rescue_state clear
• D. svc_rescue_state normal
  svc_node start

Answer: A

 

NEW QUESTION 32
A Storage Administrator is adding an appliance into an existing Dell EMC PowerStore T cluster.
What is different about the management network configuration for the new appliance compared to configuring an initial appliance for the cluster?

• A. Additional appliance inherits all its management IPs from the existing appliance
• B. Additional appliance does not require a cluster management IP address
• C. All the needed management IP addresses for the new appliance must be pre-configured on the cluster
• D. All the needed management IP addresses for the new appliance are auto-generated by the cluster

Answer: C

Explanation:
Each appliance must have Management and Storage networks configured. Management networks connect the cluster to management services such as DNS, NTP, and vCenter. The management network also enables external clients to access the cluster. The Storage network connects the cluster to an existing storage network or establishes a new network within the cluster. It also enables external clients to access the storage in the cluster. Both the Management and Storage networks require at least three IP addresses

 

NEW QUESTION 33
......

Individuals aspiring for the Dell DES-1241 exam are those willing to improve their installation and maintenance skills. This test ensures one is able to take part in doing these tasks aimed at PowerStore arrays for storage within system environments that are open. Installing, cabling, maintaining, upgrading, and basic troubleshooting are the topics involved as well.

 

DES-1241 Dumps PDF - DES-1241 Real Exam Questions Answers: https://pass4sure.dumptorrent.com/DES-1241-braindumps-torrent.html