Updated Dec-2021 C-HANATEC-17 Exam Practice Test Questions
Verified C-HANATEC-17 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump
SAP C-HANATEC-17 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| SAP HANA Installation, Configuration and Upgrade > 12% | Performing installation, update and post-installation configuration tasks of the SAP HANA 2.0 database system. |
| SAP HANA Architecture and Deployment Options 8% - 12% | Describing the SAP HANA database system architecture and the different deployment options. |
| SAP HANA Backup and Recovery 8% - 12% | Configure and execute SAP HANA database system backups and restores in single host and system replication setups. |
NEW QUESTION 37
Which prerequisites of the primary system and the secondary system are mandatory before you can activate the SAP HANA system replication with secondary time travel? There are 2 correct answers to this question.
- A. An explicit read-only connect on between both systems must be available
- B. Both systems are located in the same data center.
- C. The CPU architecture must be identical.
- D. Both must have the same SAP HANA version.
Answer: C,D
NEW QUESTION 38
Which of the following tasks can you perform using the resident SAP HANA database lifecycle manager (HDBLCM)? Note: There are 3 correct answers.
- A. Transport application changes
- B. Remove host roles
- C. Uninstall the individual components
- D. Rename the SAP HANA database system
- E. Rename the SAP HANA Database hostname
Answer: B,C,D
NEW QUESTION 39
The design-time version of a security role can contain which of the following information? There are 2 correct answers to this question.
- A. The privileges assigned to the role
- B. The users assigned by default to this role
- C. The role name
- D. The users assigned to the role
Answer: A,C
NEW QUESTION 40
What do you have to consider when you perform a Tailored Data Center Integration (TDI) installation for a productive SAP HANA database system? There are 2 correct answers to this question.
- A. Obtaining C_HANATEC_XX Certification.
- B. Obtaining the hardware certification from SAP for the existing hardware you are going to use.
- C. Having 10 GBit/s for storage zone and 1 GBit/s for internal zone for network connectivity.
- D. Having the data and log volumes on the different disks.
Answer: B,D
NEW QUESTION 41
Which activity must you perform before you can replay a workload using the Capture and Replay Application? Note: There are 2 correct answers.
- A. Start the replayer on the source system
- B. Restore the source tenant backup into the target tenant
- C. Create a secure store key on the control system host
- D. Create the replayer user in the control system
Answer: C,D
NEW QUESTION 42
Which SQL privileges can you grant to another user?
- A. DATA ADM IN
- B. ATTACH DEBUGGER
- C. CREATE SCHEMA
- D. CATALOG READ
Answer: D
NEW QUESTION 43
Which connection types are allowed when you use system replication with the Active/Active option? There are 2 correct answers to this question.
- A. Automatic round-robin statement routing
- B. Explicit read and write on the secondary system
- C. Implicit hint-based statement routing
- D. Explicit read only on the secondary system
Answer: C,D
NEW QUESTION 44
What are the merge methods that are triggered by the SAP HANA system processes? There are 2 correct answers to this question.
- A. Hard
- B. Auto
- C. Smart
- D. Critical
Answer: B,D
NEW QUESTION 45
Which information is provided via the SUM Ul? There are 3 correct answers to this question.
- A. The memory consumption of SUM
- B. The active roadmap step
- C. A progress bar for the overall procedure
- D. The content of log files via the log viewer
Answer: B,C,D
NEW QUESTION 46
In the General Licensing Process which of the following statements are true regarding Temporary license keys?
There are 2 correct answers to this question.
- A. Temporary license keys are manually installed by the SAP HANA system
- B. Temporary license keys are automatically installed by the SAP HANA system
- C. After 28 days, the temporary license expires and the system is locked down
- D. After 90 days, the temporary license expires and the system is locked down
Answer: B,C
NEW QUESTION 47
In which of the following SAP HANA scenarios is it recommended to encrypt communication between the client software and SAP HANA? There are 2 correct answers to this question.
- A. SAP HANA as a data mart for reporting and analytics.
- B. SAP HANA as a platform for providing database and application services to native SAP HANA-based applications.
- C. SAP HANA as a classic three-tier architecture as the primary database (for example. SAP NetWeaver Business Warehouse, SAP Business Suite Installation).
Answer: A,B
NEW QUESTION 48
Which tool do you use to investigate an SAP HANA system that is started but can't be reached using SQL?
There are 2 correct answers to this question.
- A. HANASitter
- B. HDBAdmin
- C. hdbcons
- D. Sapcontrol
Answer: C,D
NEW QUESTION 49
How can you optimize the Database Migration Option (DMO) procedure downtime for a production system?
There are 2 correct answers to this question.
- A. Use the benchmarking option to find the optimal throughput during the DMO procedure.
- B. Use the Test Cycle opt on to find the optimal number of R31oad processes in a test run.
- C. Set the optimal number of R31oad processes during benchmarking and the DMO procedure
- D. Provide the measured table migration duration data for optimal table sequencing during benchmarking.
Answer: C,D
NEW QUESTION 50
Which file systems are supported for the SAP HANA database system? There are 2 correct answers to this question.
- A. EXT3
- B. GPFS
- C. Dxfs
- D. MPFS
Answer: A,B
NEW QUESTION 51
After you start the SAP HANA database, what does the system do to ensure that it is in a consistent mode?
- A. It rolls back write transactions that were open when the database was stopped
- B. It rolls back changes of committed transactions that were NOT written to the data area
- C. It reloads a savepoint with the restored consistent state of the database
- D. It determines and rolls forward aborted transactions
Answer: A
NEW QUESTION 52
You created data and log backups on the file system. Due to a hardware failure, you use the Recover Database app in SAP HANA cockpit 2.0 to recover the crashed SAP HANA database. From which location does the Recover Database app read the recovery information by default?
- A. $(DIR_INSTANCE)/<hostname>/trace
- B. $(DIR_INSTANCE)/../global/hdb/custom/config
- C. $(DIR_INSTANCE)/backup/data
- D. $(DIR_INSTANCE)/backup/log
Answer: D
NEW QUESTION 53
Your customer has purchased a 1.5 TB SAP HANA license. To which value do you set the GLOBAL_ALLOCATION_LIMIT parameter when you have four 1TB nodes in an SAP HANA scale-out system with three worker and one standby nodes? Please choose the correct answer.
- A. 375 GB
- B. 512 GB
- C. 1.0 TB
- D. 1.5 TB
Answer: B
NEW QUESTION 54
logical error occurred in one tenant of your SAP HANA database. What action do you perform to make the tenant consistent again? Please choose the correct answer:
- A. Recover the system database first and then recover the affected tenant.
- B. Recover the system database. The affected tenant is recovered automatically.
- C. Recover the affected tenant. The system database is NOT recovered.
- D. Recover the affected tenant first and then recover the system database.
Answer: B
NEW QUESTION 55
What is the correct minimum requirement for log volume and/hana/shared/ file system for an SAP HANA database system? Please choose the correct answer.
- A. For 1 TB system, Log volume = 1 TB,/hana/shared/ = 1TB
- B. For 512 GB system, Log volume = 512 GB,/hana/shared/ = 256 GB
- C. For 2 TB system, Log volume = 1 TB,/hana/shared/ = 1TB
- D. For 256 GB system, Log volume = 128 GB,/hana/shared/ = 256 GB
Answer: D
NEW QUESTION 56
You suspect an authorization issue while executing SAP HANA reports that contain calculation views. How do you configure the authorization trace? There are 2 correct answers to this question.
- A. Select INFO from the System Trace Level for the Indexserver component and then select AUTHORIZATION.
- B. Specify the user as the database user.
- C. Specify the name of the table/view.
- D. Select INFO from the System Trace Level for the Preprocessor component and then select AUTHORIZATION.
Answer: A,B
NEW QUESTION 57
Which SAP HANA database system usage types are automatically assigned to tiles in the SAP HANA cockpit? There are 3 correct answers to this question.
- A. Custom
- B. Production
- C. Development
- D. Sandbox
- E. Test
Answer: B,C,E
NEW QUESTION 58
Which removal statuses allow you to remove a host from an SAP HANA scale-out landscape Note: There are
2 correct answers.
- A. Reorg not required
- B. Reorg pending
- C. Reorg active
- D. Reorg finished
Answer: A,D
NEW QUESTION 59
Which of the following statements are true about SAP HANA Live? There are 2 correct answers to this question.
- A. SAP HANA Live for SAP Business Suite is a Rapid Deployment Solution.
- B. SAP HANA Live for SAP Business Suite focuses on Enterprise Data Warehouse cases, and not on live operational reporting.
- C. SAP HANA Live for SAP Business Suite comprises of an Analytical Model.
- D. SAP HANA Live for SAP Business Suite comes with a comprehensive set of predefined models from across the SAP Business Suite.
- E. SAP HANA Live for SAP Business Suite is an accelerator.
Answer: C,D
NEW QUESTION 60
......
Pass SAP Certified Technology Associate C-HANATEC-17 Exam With 272 Questions: https://pass4sure.dumptorrent.com/C-HANATEC-17-braindumps-torrent.html